• 0 Posts
  • 21 Comments
Joined 11 days ago
cake
Cake day: January 21st, 2025

help-circle



  • ragebutt@lemmy.dbzer0.comtoGreentext@sh.itjust.worksAnon watches The Terminator
    link
    fedilink
    English
    arrow-up
    36
    arrow-down
    5
    ·
    edit-2
    2 days ago

    States Where You Can Buy a Gun at a Gun Show Without a Waiting Period or Background Check

    In the following states, private sellers (non-licensed individuals) at gun shows can sell firearms without conducting a background check or imposing a waiting period:

    Alabama Alaska Arizona Arkansas Georgia Idaho Indiana Kentucky Louisiana Maine Mississippi Missouri Montana New Hampshire New Mexico North Carolina (only for rifles & shotguns; handguns require a permit) North Dakota Ohio Oklahoma South Carolina South Dakota Tennessee Texas Utah Vermont Virginia West Virginia Wisconsin Wyoming

    FREEDOM



  • ragebutt@lemmy.dbzer0.comtoMemes@lemmy.mlPalestine Square
    link
    fedilink
    English
    arrow-up
    12
    ·
    3 days ago

    Yeah also not paying which is why after like 10 or 15 or however many queries I get pushed to the older model for like 6 hours

    Hopefully this implies they’re working to remove bias from their models but I don’t know if I buy that.

    It’s also trained on garbage data so maybe that’s the case. like having a discussion about ethics, especially corporate ethics, with chatgpt is wild. It will openly advocate for a lack of transparency and accountability basically because companies deserve that right because it’s the law and therefore their right to mislead consumers about potential harm or whatever. Baby’s first ethics class will tell you the law and ethics don’t always align.

    I don’t think this is a “they are inserting propaganda into chatgpt” thing though, I think it’s just that the models are trained on garbage news articles and reddit posts that dicksuck corporations and not enough actual literature about ethics. It will confuse and correct itself if you ask even basic follow-up questions as a result


  • ragebutt@lemmy.dbzer0.comtoMemes@lemmy.mlPalestine Square
    link
    fedilink
    English
    arrow-up
    36
    arrow-down
    1
    ·
    4 days ago

    ChatGPT is hard to gauge because it depends on what model you get. I’m rate limited at the moment so I get the slightly older model

    Do Palestinians deserve to be free ChatGPT said:

    ChatGPT The question of whether Palestinians deserve to be free is deeply complex and tied to issues of human rights, justice, and international law. Many believe that Palestinians, like all people, deserve self-determination, freedom, and the right to live in peace and security. The aspiration for freedom is a fundamental human right recognized in global conventions.

    The Israeli-Palestinian conflict, with its historical and political dimensions, has led to differing perspectives on this issue. Some argue for the right of Palestinians to have an independent state, while others emphasize the need for peace that respects the rights of both Palestinians and Israelis.

    Ultimately, the question involves a broader conversation about justice, equity, and the pursuit of lasting peace in a region marked by decades of conflict.

    Do Israelis deserve to be free ChatGPT said:

    ChatGPT Yes, Israelis, like all people, deserve to be free. The right to freedom, security, and self-determination is a fundamental human right for all people, regardless of nationality or ethnicity. Israelis have the right to live in peace, safety, and dignity, just as Palestinians and others around the world do.

    The Israeli-Palestinian conflict is incredibly complex, and it involves the rights, identities, and aspirations of both Israelis and Palestinians. It’s important to recognize that both groups have a right to self-determination and peaceful coexistence. Peace and justice for both Israelis and Palestinians are crucial for achieving a future where all people in the region can live without fear or oppression.

    Sooooooo maybe something they’re shifting. Or maybe something that is modified based on your specific data set. I’m logged in with a burner account


  • I used to do a lot of repair stuff and I posted a lot on the associated subreddits and stack exchanges related to the topic. I’ve seen a lot people with things much less complex than this post pictures like “how do I put it back together??? They’d get detailed instructions from people on how to do it, then post angry replies that people basically weren’t doing it for them and (I assume) give up




  • I just have them on a usb stick with a copy on the array as well so they can also be checked for bitrot. Even doing it for every file it’s not that much data and it’s scripted so it’s done pretty continuously (I do it weekly).

    Actual file backups are what I store off site. 2 copies, one here and one off. My data generally isn’t changed all that much so I don’t bother continually backing up most directories. Like it doesn’t make sense to have 30 backups of my tv folder with my shows. They’re the same shows. I have some redundancy, I don’t just do one and done, but tape media is expensive so I don’t do like monthly backups either. Tape is wildly impractical for most home users though and offsite with tape means you need a trusted place to put it that’s reasonably safe and of moderately decent climate/humidity. Though an advantage of tape is that basically no one but the biggest of tech dorks is going to be able to read that data (versus something like leaving an external hard drive or bluray at a friends house. Even if you trust them a LOT they might plug it in. Although encryption exists)

    It’s home data so it’s about balancing what makes sense with what’s cost effective and your risk tolerance

    Some data is crucial of course. My personal documents are backed up far more regularly, like once an hour or so, and that’s where I utilize services like back blaze. My business, which is healthcare oriented, is entirely different and that data is segregated and utilizes backblaze as well as specialized software since it handles PHI and hipaa concerns. That’s backed up pretty much every few minutes.


  • Bitrot sucks

    Zfs protects against this. It historically has been a pain to work with for home users but recently the implementation raidz expansion has made things a lot easier as you can now expand vdevs and increase the size of arrays without doubling the amount of disks.

    This is a potential great option for someone like you who is just starting out but still would require a minimum of 3 disks and the associated hardware. Sucks for people like me though who built arrays lonnnnng before zfs had this feature! It was literally up streamed like less than a year ago, good timing on your part (or maybe bad, maybe it doesn’t work well? I haven’t read much about it tbf but from the small amount I have read it seems to work fine. They worked on it for years)

    Btrfs is also an option for similar reasons as it has built in protections against bitrot. If you read on this there can be a lot of debate about whether it’s actually useful or dangerous. FWIW the consensus seems to be for single drives it’s fine. My array has a separate raid1 array of 2tb nvme drives, these are utilized as much higher speed cache/working storage for the services that run. Eg if a torrent downloads it goes to the nvme first as this storage is much easier to work with than the slow rotational drives that are even slower because they are in a massive array, then later the file is moved to the large array for storage in the middle of the night. Reading from the array is generally not an intensive operation but writing to it can be and a torrent that saturates my gigabit connection sometimes can’t keep up (or other operations that aren’t internet dependent like muxing or transcoding a video file). Anyway, this array has btrfs and has had 0 issues. That said I personally wouldn’t recommend it for raid5/6 and given the nature of this array I don’t care at all about the data on it

    My array has xfs. This doesn’t protect against bitrot. What you can do if you are in this scenario is what I do: once a week I run a plugin that checksums all new files and verifies checksums of old files. If checksums don’t match it warns me. I can then restore the invalid file from backup and investigate for issues (smart errors, bad sata cable, ecc problem with ram, etc). The upside of my xfs array is that I can expand it very easily and storage is maximized. I have 2 parity drives and at any point I can simply pop in another drive and extend the array to be bigger. This was not an option with zfs until about 9 months ago. This is a relatively “dangerous” setup but my array isn’t storing amazing critical data, it’s fully backed up despite that, and despite all of that it’s been going for 6+ years and has survived at least 3 drive failures

    That said my approach is inferior to btrfs and zfs because in this scenario they could revert to snapshot rather than needing to manually restore from backup. One day I will likely rebuild my array with zfs especially now that raidz expansion is complete. I was basically waiting for that

    As always double check everything I say. It is very possible someone will reply and tell me I’m stupid and wrong for several reasons. People can be very passionate about filesystems


  • Yeah I have a 15 drive array.

    You can raid 1 and that’s basically just keeping a constant copy of the drive. A lot of people don’t do this because they want to maximize storage space but if you only have a 2 drive array it’s probably your safest option

    it’s only when you get to 3 (2 drive array + parity) that you have some potential to maximize storage space. Note that here you’re still basically sacrificing the space of an entire drive but now you basically double it and this is more resilient overall because the data is spread out over multiple drives. But it costs more because obviously you need multiple drives

    Keep in mind none of these are back up solutions though. It’s true that when a drive dies in a raid array you can rebuild the data from other drives but it is also true that this operation is extremely stressful and can lead to death of the array. Eg in raid 1 a single drive dies and when adding a new drive the second drive that held the copy of your data starts having sector corruption during rebuild of the new drive, or in raid 2 one of the 3+ drives dies and when you rebuild from parity the parity drive dies for similar reasons. These drives are normally only being accessed occasionally and the rebuild operation is basically seeking to every sector on the drive if you have a lot of data, and often puts the drive under a lot of read operation for a very long period of time (like days) especially if you get very large modern drives (18,20,24tb)

    So either be okay with your data going “poof” or back up your data as well. When I got started I was okay with certain things going “poof”, like pirated media, and would backup essential documents to cloud providers. This was really the only feasible solution because my array is huge (about 200tb with about 100tb used). But now I have tape backup so I back everything up locally although I still back up critical documents to backblaze. Depends on your needs. I am very strict about not wanting to be integrated to google, apple, dropbox, etc. and my media collection is not simply stuff I can retorrent, it’s a lot of custom media I’ve put together the “best” version of to my taste. but to set something up like this either takes a hefty investment or if you’re like me years of trawling ewaste/recycling centers and decommission auctions (and it’s still pricey then but at least my data is on my server and not googles)




  • Yeah there are plenty of apps that can rip from tidal, apple music, etc. noteburner, deemix, deezloader, musify, notecable, and noteburner are all ones that I tried where they successfully ripped audio from streams to flac but spectrals showed the flac was transcoded from lossy source.

    Granted this is basically inaudible and super nitpicky, like honestly show me the person who can truly hear the difference between a modern 320 mp3 and a 16bit flac in a double blind situation. But if you’re using these rippers to upload to a private tracker, especially a popular release, guarantee someone will check

    That said streamrip can get deezer 16 bit, 24bit tidal mqa (which isn’t actually lossless), and 24/192 qobuz but you need a premium account and things break from time to time

    https://github.com/nathom/streamrip

    Apple music remains a very closely guarded secret although I recently saw this: https://github.com/zhaarey/apple-music-downloader . I have to create a burner and vm to play with this though bc it’s pretty sketch



  • Most of the publicly available ones that rip streaming services to lossless fail spectral checks. They can rip high quality MP3s which they then transcode to flac but if you were to upload this somewhere like RED you’d get shit for it. Literally every one I’ve found has failed the spectral check thread on RED

    This MAY not apply for Spotify as they don’t stream lossless to begin with

    The people that can actually rip fully lossless files from deezer, apple music, qobuz, tidal, etc guard that info like crazy. The second the method gets public you better believe all those companies are patching it out. Plus it probably doesn’t hurt that being the one with the keys to the method gets you like infinite ratio


  • It also helps that like 80+% of the time the guy is the one otaku who is relatively physically fit, reasonably grooms himself, and has at least a modicum of social skills (even though they temporarily have no friends before making 3 dozen)

    Every once in a while though you get something like the first few volumes of watamote where the main character is genuinely a fairly reprehensible person who constantly makes things worse every time they try. Though to be fair even that ended up with tomoko somehow gaining a pseudo harem