Hey! I’ve been wanting to make the switch to Linux for a while now, and I’ve dual booted Mint for a while. I realize that most games work well with Linux, but I can’t seem to get my Elgato HD60 Pro to work. (Pci-e capture card)

I just want to be able to grab gameplay with HDMI passthrough on Linux, and right now, this is my biggest hurdle (along with Adobe not working well, but I’m gonna switch to davinci resolve for that)

Any help will be greatly appreciated.

  • Magiilaro@feddit.org
    22·
    27 days ago

    Yes, internal consumer capture cards are not really supported on Linux, the manufacturers just don’t care so no Linux drivers are available.

    That’s why I have gotten myself a prosumer grade card from Blackmagic. https://www.blackmagicdesign.com/products/intensitypro4k

    Or you could use USB Capture Cards which are better supported, because most of them act like a USB camera, using the same protocol which eliminates the need for drivers, but they often are more limited or have a worse picture quality then internal cards.

  • FQQD@lemmy.ohaa.xyzEnglish
    10·
    28 days ago

    I use a cheap hdmi splitter and a cheap usb capture stick and it works very well, although I don’t use anything more than 1080p60. No idea how to get Elgato hardware working, though. They don’t seem to have great Linux support.

  • nek0d3r@lemmy.world
    5·
    26 days ago

    This is definitely a big blocker for my move to Linux as well, I’m heavily dependent on my Elgato HD60 X

  • BurnoutDV@lemmy.world
    3·
    26 days ago

    There is the avermedia bu113 card, around 100 euros, works on everything from Windows pc, to ipad and of course linux without any additional drivers as it supports with UVC, downside, you basically need a hdmi splitter if you want to see something as its build to use big cameras as webcam

    • Focal@pawb.socialOP
      2·
      26 days ago

      Already have a splitter :)

      Will I be able to see stuff in OBS though? And is it passthrough?

      • BurnoutDV@lemmy.world
        2·
        26 days ago

        I might have to retract the “flawless” part of my “sales pitch”. I tried to make it spontaneously work on my work laptop using Fedora and it did in fact, not work. To visually show how it should work, I made a picture with an iPad where it actually does work with my work desktop with 2560x1440 resolution, 60fps. But, it did worked in the past, so I am fairly certain I just suck at using my device. If it would work it appears just as any other capture card…as weird webcam device.

        But as said, you need a splitter before the card and then one output into the card. I actually spend a minute to locate a non-black HDMI cable just for you! https://imgur.com/a/BvZDZRJ

        • Focal@pawb.socialOP
          2·
          23 days ago

          I really appreciate it. Thank you. I like that it can capture ipads and devices like that too.

          Thanks for using a non-black cable too :)