Most of this is true, I’ve never used cast iron in my life
Some of this is cast iron, I’ve been true my whole life.
Don’t these pans last like generations, being passed down? I doubt your grandma and her grandma were bothering to apply 8 coats of flaxseed oil and heating it up to 1000 degrees and the pans would still perform as expected for ages
Has anyone outside of a commercial kitchen ever actually destroyed a stainless steel pan though
Yes.
Apparently you can’t hear up tortillas in them without it forever getting scorch marks. I suppose only thing I haven’t tried is using a machine sander on it to try to remove it.
Barkeepers friend (powdered metal and glass polish/cleaner, typically comes in a cannister) will get that off with a little bit of elbow grease.
Half the pans I’ve bought i got at a thrift store for like a buck because people thought they ruined them with a little bit of scorching., and I’ve gotten some nice stuff.
Unfortunately haven’t found that cheaply available in Finland. I know about it too. It’s the only thing I haven’t tried other than straight up sanding it
So the legend of bar keepers friend is that it was invented after someone boiled a bunch of rhubarb greens and noticed it cleaned the pan. I reckon any green high in oxalic acid (the main ingredient in BKF) should do similarly enough to the actual product to let you know if it might work.
A straight angle grinder is better suited for that job
Are those scorch marks an issue beyond aesthetics though? (Genuinely curious, not judging)
They leave a burnt taste in the food
In that case, try boiling a mixture of baking soda and water in it, then scouring it using tongs with copper wool (I’d probably use steel wool, but that might also leave scratches, I don’t know). If it’s giving your food a taste, it is coming off, just really gradually and under high heat.
Done that already before, twice.
Womp womp
Deleted
If I know grandmas, I was probably purchased at Kmart in like 1996.
I bought a $20 cast iron pan at target, I season it like once a year. I just wash it and make sure to dry it, I’m sure this is against the rules. Seems to work fine for me though. I wouldn’t say it’s nonstick but it’s mostly fine.
A $20 Teflon pan would be flaking and unusable, so for $20 it’s a good deal.
Reject tradition. Embrace forever chemicals.
BerlingerHaus uses some kind of artifical stone instead of teflon. I’ve only got a grill pan so far but it’s easier to use and to clean than teflon. Surely wherever you are has something similiar?
Enameled cast iron is definitely a thing, our le cruset Dutch oven is a work horse
Le creuset Dutch oven is a different budget :x
We found a used older one, used it just about daily for a couple years before my dumb ass left it in an oven that was too hot (some old ones only got to like 400F apparently) and caused a bunch of cracks. We messaged le cruset and after sending them some pictures and a sob story they sent us a brand new one.
Doesn’t need to be a new one or le cruset, enameled cast iron is just nice generally in my experience
I got a $30 enameled cast iron 6-quart Dutch oven at a post-Christmas sale. It wasn’t Le creuset, but it was a kitchenaid, which was over $100 at its original price. I also got a crockpot brand one, which was under $40 at its standard price, and they both lasted over a decade, until I moved across an ocean (afaik, my former neighbor is still very happily using them and my old kitchen aid stand mixer).
Stainless steel I swear by though. Easy to clean and nothing sticks if you heat the oil properly.
My sauce pans are stainless and are The Shit. Had them four years now and they’re still in good order.
My frying pan is cast iron and is The Shit. Had it a year and it’s still as good as when I bought, and I use it every day.
I will never go back to flaky non-stick bullshit.
While oil is necessary, It’s more about how you preheat it and your technique, rather than how you oil it; no amount of oil is going to save you from over crowding a cold pan.
Yep, the old hot pan cold oil technique you use with a traditional woks works well with cast iron, carbon steel, and stainless steel.
You basically get the pan as hot as you can, coat with enough to cover the pan with a thin layer of oil, and heat until smoking. Dump out your hot oil and add your cold oil and then your ingredients. If you get good at hot pan cold oil you can make just about anything nonstick.
I’ve always just used the bead test where you drop a drop of water in a dry pan and if it beads up and rolls around, instead of just sizzles, then the pan is hot enough to add oil (although this also works if it’s too hot, but I have a good sense of how long it takes to get to this temp, so I’m usually testing just before and just after it hits this temp). Then when the oil is shimmering, this is the time to add food.
There is nothing wrong with putting cast iron in the dishwasher. I do it all the time.
If the dishwasher strips the seasoning, you seasoned it wrong
Let the weakness be washed away
Don’t care, use carbon steel
